Dave Smith Instruments PROPHET 08 DESKTOP - Manual (Page 14)

Page 3:
Clock: xxxxxxxx
LocalControl:
xxx
Clock: see table – Selects the MIDI clock status.
Display MIDI Clock Setting
Internal MIDI clock is neither sent nor received
MIDI Out MIDI clock is sent
MIDI In MIDI clock is received
MidiIn/Out MIDI clock is received and transmitted (use
with Poly Chain)
Local Control: Off, On – Enables or disables the internal connection between
the keyboard and panel controls and the synth electronics. This is useful with
external sequencer operation.
Page 4:
MParam Send: xxxx
M Param Rec: xxxx
MIDI Parameter Send: NRPN, CC, Off – Changes to the values of the Prophet
'08's front panel controls are transmitted via MIDI as Non-registered Parameter
Number (NRPN) controllers or as Continuous Controllers (CC). Transmission of
parameters can also be turned off. See MIDI Implementation on page 39 for
details.
Note: NRPNs are the preferred method of parameter transmission, since
they cover the complete range of all parameters, while CCs only handle
the main parameters.
MIDI Parameter Receive: All, NRPN, CC, Off – Sets the method by which the
Prophet '08 receives parameter changes via MIDI. As with transmission, NRPNs
are the preferred method, though some controllers may only be able to send
CCs.
Page 5:
MIDI Program: xxx
MIDI Pressre: xxx
MIDI Program: Off, On – When On, the synth will respond to MIDI program
changes received, and will transmit Program changes to MIDI Out.
8