Dave Smith Instruments PROPHET 08 DESKTOP - Manual (Page 41)

Rack Mounting the Module
The Prophet '08 module includes rack ears for mounting the module in a
standard, 19" equipment rack. The module itself is 4U (4 rack spaces) high. The
inputs and outputs are recessed, but it may be necessary to use angled plugs for
audio and MIDI to prevent the plugs and cables from interfering with a fifth
space above the module.
To rack mount the module:
1. Remove the six 1" 8-32 screws from the two wood end panels. Keep
the screws and end panels in a safe place, to revert back to the tabletop
configuration.
2. Using the six supplied 3/8" 8-32 flat-head screws, attach the rack ears
to each side of the module. Please note: It is very important to use the
shorter screws to attach the rack ears. Longer screws may damage the
internal components.
3. Connect the necessary cables (power, MIDI, audio, etc.).
4. Mount the module in the rack.
35