Dave Smith Instruments PROPHET 08 DESKTOP - Manual (Page 61)

55
Hidden Functions
Hold the P
ROGRAM
switch and hit the +/Y
ES
switch to set the Program to a basic
patch, with most parameters set to zero. It does not save the sound in the current
program; it only changes all the parameters.
If you hold the E
DIT
L
AYER
B switch while in Stack or Split, the E
DIT
L
AYER
B
switch will blink; this indicates you are now in Link Mode, which means that
any parameter you change will update that parameter in both Layer A and Layer
B. This can be handy while playing Stacked or Split programs in a live situation.
The following hidden functions are listed for information only; you should not
normally have to use these. To use these, hold the G
LOBAL
switch and hit:
LFO 1 Switch – Displays the software versions for the Main and Voice
processors.
LFO 2 Switch – Calibrates the low pass filters and analog oscillator waveshapes.
LFO 3 Switch – Resets all Global parameters to factory settings
To calibrate the pitch and mod wheels:
1. Turn the mod wheel all the way off (down), and while also holding the
pitch wheel off, hold the Global switch and hit the Mod 1 switch.
2. Return the pitch wheel to center, and hold Global and hit the Mod 2
switch.
3. Move the Mod wheel all the way on (up), and while also holding the
pitch wheel all the way on, hold Global and hit the Mod 3 switch.