Quick start, Please register, Selecting and editing programs and global settings – Dave Smith Instruments PROPHET 08 DESKTOP User Manual

Page 7: Summary

Advertising
background image

Quick Start

Thanks for purchasing the Prophet '08! Listen to the sounds, twiddle some
knobs, have some fun!

Please Register!

Please go to www.davesmithinstruments.com and register your synth. If you
purchased directly from us, there is no need to register – we already have your
contact information.

So, plug in the power supply, connect (in stereo!!) to your mixer/sound system,
switch on the power, and start playing!

Try applying keyboard pressure (aftertouch) and the mod wheel. Many sounds
are fairly simple at first, then come alive when you use the controllers. With
other sounds, you may need to hold the notes a while to let the sound unfold.
Playing in different ways has a big effect on the programs.

Selecting and Editing Programs and Global Settings

You can use the +/- switches to step through the Programs. Also, the PARAM

1

knob changes the Program and PARAM

2 changes the Bank.

If you want to edit a Program, just turn any knob. The new value will be
displayed in the bottom line of the LCD (the top line displays the programmed
value for handy reference). Once a parameter has been selected, the PARAM

2

knob will also change the value, and the +/- switches will increment or
decrement the value. Hit the + and - switches at the same time to set the
parameter to zero.

That’s the whole idea with this instrument – grabbing knobs and changing the
sound! After turning knobs, just hit the Program switch so the LCD goes back to
the Program / Bank screen, allowing you to change Programs again.

Press the G

LOBAL

switch to change higher level parameters, such as MIDI

channel number, Transpose/Detune, and so on. These are remembered when the
synth is turned off. Note that in Global Mode, the screen displays two
parameters at a time. The top parameter is changed by the PARAM

1 knob and

the lower parameter is edited by the PARAM

2 knob. The +/- switches select

new pages.

Summary

You should be up and running now; for more operation information, read on. Or,
just look up specific parameters for detailed notes. Pages 35 through 38 contain
a handy reference for mod destinations and sources. At some point you should

1

Advertising
This manual is related to the following products: