EFCO S5600 Structural Glazed - Manual (Page 16)

EFCO CORPORATION 7/2012 PART NO. Y306 Page 16 of 28
Series 5600 Silicone Structural Glazed Installation Instructions
Section VI: Glazing Preparation
Glazing Preparation
2"
Seal at Captured Vertical Jambs
Prior to installation of the joint plug, apply sealant on all joint
plug contact surfaces. After installation of the plugs, reseal
joints and tool excess sealant to provide a smooth surface
Edge of glass
Seal gasket race 2”
each direction at all
corners with sealant
Apply sealant to face of joint
plug prior to installation of
pressure plate.
Provide downward slope with
sealant without interfering
with edge of glass, to allow
drainage of condensation.
Elevation of Joinery Prior
to Setting Glass
Elevation of Joinery at
Slip-on Horizontal Prior to
Setting Glass