Cisco unified videoconferencing 3515 mcu safety, Electrical safety for the 3515 mcu, Grounding – Cisco 3515 MCU12 User Manual

Page 45: C h a p t e r

Advertising
background image

C H A P T E R

6-1

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU12 and MCU24 Release 5.1

OL-11897-01

6

Cisco Unified Videoconferencing 3515 MCU
Safety

This section describes the following topics:

Electrical Safety for the 3515 MCU, page 6-1

ESD Procedures for the 3515 MCU, page 6-2

Electrical Safety for the 3515 MCU

To avoid an electric shock or damage to the Cisco Unified Videoconferencing 3515 MCU unit, servicing
should be performed by qualified service personnel only.

To reduce the risk of damaging power surges, Cisco recommends installing an AC surge arrestor in the
AC outlet from which the Cisco Unified Videoconferencing 3515 MCU unit is powered.

Warning

Do not attempt to open the Cisco Unified Videoconferencing 3515 MCU unit.

Warning

Changes or modifications to the device that are not approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Grounding

The power cable of the Cisco Unified Videoconferencing 3515 MCU unit should only be connected to a
power outlet that has a protective earth contact. Do not use an extension cord that does not have a
protective conductor (ground). The Cisco Unified Videoconferencing 3515 MCU unit can become
dangerous if you interrupt any of the protective conductors (grounding) or disconnect any of the
protective earth terminals.

Advertising