Environmental Water Systems CWL CHLORAMINE 1865 - Manual (Page 2)

2 SCHEMATIC: SPECTRUM SYSTEMS
For Illustration Purposes Only:
Cut-away of CS-EWS-1354-7000
Tank, valve and all contents (as pictured below) delivered fully assembled.
Bypass and supplied adaptors some assembly required.
All measurements are approximates and system heights may have variances up to 1”.
Review this Manual for Proper Setup, Installation and Start-up of this System.
Model #’s: CS-EWS-1354-7000, CS-CWL-1354-7000
overall
height
62”
height
to center of
bypass
58”
tank
height
54”
Outer Cover: White plastic cover and the coordinating plastic dome are
strictly aesthetic and are non-functional parts of the Spectrum System.
self leveling
base
Tank: Non-corrosive, seamless, one-piece blow molded with tough epoxy
and fiberglass outer laminate. Note: actual color of tank may vary.
Filtration: 2.5 cubic feet or 65 pounds of EWS proprietary high-grade
granular activated carbon.
Freeboard: Space allows media space to lift during backwash.
Lower Riser Screen and Underbed: Maintains a closed system where
media does not escape into home plumbing during normal operation. The
underbed provides greater water distribution during filtration and backwash.
Conditioning (EWS Series Only): ICN Riser Manifold contains two ICN
conditioners that catalytically suspend hardness minerals so they inhibit
adhesion to surfaces: Note: CWL Series does not contain this part.
Riser: Specialty PVC tubing food & beverage compliant for distribution of
filtered water flow up through the riser and out to the home or water down
through the riser to lift and properly backwash in order to self clean filtra-
tion media
tank width 13”
Highly Recommended:
Stainless steel corrugated water connectors, PEX or PVC Sch 40 have a
flexible capability that may assist with issues where the rough and finish
measurements are slightly off or where pressure surges/spikes or back
pressure occur. This flexible connection may prevent tank and valve issues
where rigid or hard pipe create problems over time. Perform all plumbing
according to state or local codes.
18” clearance needed from center of tank for proper installation
Valve (front view)
Not pictured: Bypass Valve to the rear of the Valve.