Environmental Water Systems DWS-UV - Manual (Page 4)

4
www.ewswater.com O: 702.256.8182; M-F 8:30am-4:30pm PST E: [email protected]
A Special Message to Our Customers
EWS, Inc. and Environmental Water Systems would like to thank you for your consideration in selecting from our comprehensive list of resi-
dential filtration and conditioning product. We recommend that you take the time to read the information that pertains to your product as
you begin to use it.
The information in this manual is designed to assist your installer to set-up, install and start-up your system properly. In addition, the informa-
tion contained in this manual is designed to provide the consumer, the most comprehensive information on this series of product. Please
contact us if you have any questions, comments or additions to the information provided.
Sincerely,
Customer Service at EWS, Inc.
Installation of the Filtration System - Please Read the Enclosed Information
Please take the time to familiarize yourself with the unit you are about to install. Locate the box with the filter top (head assembly) and if ap-
plicable, the UV unit and the box with all the filter cartridges, tubing, angle stop valve and if applicable UV transformer.
You may need the following for proper installation:
• Teflon tape • Work Gloves • Safely Glasses • Knife or scissors • Adjustable Wrench • Pliers • Screwdriver; straight & phillips • Drill & drill bits
WARNING: Verify that all components are included with the unit and were not lost, misplaced, or damaged in shipping or handling. Any dam-
age in shipping needs to be reported to the shipping company.
WARNING: Do not attempt to install this system using defective or damaged components. Check and inspect, inlet and outlet fittings and any
other connections on this system that might have been damaged during shipping and handling. Check all these components again upon instal-
lation and start-up for any hidden issues. All plumbing should be done in accordance with all local plumbing codes. Water Pressure: minimum
40psi, maximum 75psi. Water Temperature Range (cold supply only): not to exceed 100°F or below 40°F. Electrical (if applicable): an uninterrupted
a/c supply, (if applicable): make sure voltage supply is compatible with your unit prior to install
WARRANTY: Warranty Registration of this product is required to have a warranty. A proper installation and start-up will save you time, money
and hassles, and is also required for warranty purposes. Any issue as a result of improper application, set-up, installation and/or start-up will
void any warranty.
Table of Contents
Dispenser/Faucet
Proper Placement and Q&A 5
Installation of Dispenser/Faucet 6
Placement or Locating the Essential Drinking Water System 7
Supplied Professional Connection - Connection to sink cold side supply line 8
Connection of Tubing from Supply and to Dispenser/Faucet 9
System Start-up and Operation Procedures 10
Replacement of Filter Cartridges 11
Replacement of UV Lamp (if applicable) 11
Correct Filters and How to Order Replacements 12
Troubleshooting 13
Warranty 14
How to Select EWS Whole Home Water Filtration 15
Contact Information and Customer Service back cover