ETS-Lindgren 2090 Controller - Manual (Page 153)

Model 2090 Multi-Device Controller
When communicating properly, the program will display
the current interface type in the “Interface Type:” window
and the SBC device type, status, and firmware version in
the “SBC-V Information” group. When using the Model
2090 as the interface, the bootstrap revision will not be
shown. If the “Upgrade File” box does not show the name
of the appropriate file, click on the folder button next to the
filename box to find the flash upgrade file. The “Upgrade
Version” edit box will show the target version from the
upgrade file. The boxes under “SBC-V Information” will
also indicate if there are any problems or incompatibilities
between the program, the upgrade file, the interface, and
the device to be upgraded. Refer to the following figure for
a typical screen.
Figure 9 MB-V Flash Upgrade Utility
©ETS-Lindgren, April 2006 153
Revision G– P#399199