ETS-Lindgren 2090 Controller - Manual (Page 175)

Model 2090 Multi-Device Controller
EUROPEAN COMMUNITY
DECLARATION OF CONFORMITY
The EC Declaration of Conformity is the method by which EMC Test Systems, L.P. declares that the
equipment listed on this document complies with the EMC and Low-voltage Directives.
Factory:
Issued by:
EMC Test Systems, L.P. EMC Test Systems, L.P.
P.O. Box 80589 P.O. Box 80589
Austin, Texas USA Austin, Texas USA
78708-0589 78708-0589
The products manufactured under the EMCO product name and listed below are
eligible to bear the EC Mark:
Model 2090 Multi-Device Controller
Applicable Requirements:
Standard
Criteria
EN61010-1 Safety requirements for electrical equipment for
measurement, control and laboratory use
EN55022 Class B
IEC 801-2 Level 2 4/8kV
IEC 801-3 Level 2 3V/m
IEC 801-4 Level 2 .5 I/O, 1kV AC
EN61010-1 Safety requirements for electrical equipment for measurement,
control, and laboratory use.
Authorized Signatories
___________________________
___________________________
Bruce Butler, Vice President /General Manager James C. Psencik, Dir of Engineering
___________________________
Charles Garrison, Quality Assurance Date of Declaration: April 10, 1997
The authorizing signature on the EC Declaration of Conformity document authorizes EMC Test Systems,
L.P. to affix the CE mark to the indicated product. CE marks placed on these products will be distinct and
visible. Other marks or inscriptions liable to be confused with the CE mark will not be affixed to these
products. EMC Test Systems, L.P.
has ensured that appropriate documentation shall remain available on
premises for inspection and validation purposes for a period of no less than 10 years.
©ETS-Lindgren, April 2006 175
Revision G– P#399199