ETS-Lindgren HI-3603 VLF Survey Meter User Manual
Page 44
HI-3603 VDT/VLF Survey Meter
© ETS-Lindgren, August, 2005
Revision E, Part # H-600042
44
Step 2. Briefly describe the problem in writing. Give details
regarding the observed symptom(s) or error codes, and whether
the problem is constant or intermittent in nature. Please include
the date(s), the service representative you spoke with, and the
nature of the conversation. Include the serial number of the item
being returned.
Step 3. Package the system or component carefully. Use the
original packing boxes and materials, if possible.
If the probe is under warranty, refer to the Limited Warranty
section of this manual for additional information about your
return.
PERIODIC/PREVENTIVE MAINTENANCE
The meter requires an annual calibration to verify that they are
performing within specifications. ETS-Lindgren service
personnel may perform this calibration at the factory. Return
your probe(s), using the original packing materials (if possible),
to:
ETS-Lindgren
Attn. Service Department
1301 Arrow Point Drive
Cedar Park, Texas, USA 78613