ETS-Lindgren 2088 EuroPro Electric Powered Turntable - (Archived 03/31/10) - Manual (Page 9)

MODEL 2088 ELECTRIC POWERED TURNTABLE Installation
© ETS-LINDGREN L.P. – JANUARY 2003 5
REV C – PN 399253
INSTALLATION
The following instructions are for the installation of 1.23 and 1.53
meter EuroPro turntables.
The installation of turntables 2 meters and larger will be performed
by a factory installation specialist or by individuals who have been
authorized by ETS-Lindgren to do such work. Proper installation
of the turntable directly affects performance. The following
installation information is provided to familiarize the user of the
turntable with the installation process.
CAUTION Ensure power is off and secured before proceeding
further.
TOOLS REQUIRED
‰ 3/16” allen wrench
‰ 5/16” allen wrench
‰ 3/8” allen wrenches, qty 3
‰ 6 mm. allen wrench
‰ 3/8” ratchet wrench
‰ 12” crescent wrench
‰ 15 mm. 12 point socket for ½” square head screws
‰ 7/16” open/box end wrench
‰ ½” open/box end wrench
‰ ¾” open/box end wrench
‰ 0.120 drill bit for 6-32 self tapping screws
‰ “A” & “B” drill for ¼-20 self tapping flat head screws
‰ 27/64” drill bit for ½”-13 Tap
‰ 3/8” hand drill
‰ ½”–13 Tap
‰ #2 phillips screw bit
‰ #3 phillips screw bit
‰ Measuring tape
‰ Pry bar
‰ Level
‰ Square
‰ Hacksaw
‰ Black marker
‰ File
‰ WD 40
Archived 3/31/10