Cisco Cisco Unified 7975G - Manual (Page 10)

10
• If you are using a headset, press the Headset button, and then dial. Or, if is lit, press New Call and enter a number.
• Dial the number, and then press the Headset button.
• If you have selected a number from a directory, press the Dial soft key.
• Press Redial to dial the last number, or press the Navigation button (with the phone idle) to see your Placed Calls.
• If you are placing a call while another call is active (using the same line), press Hold, and then press New Call and enter the
number.
• If you are dialing from the directory, choose Missed Calls, Received Calls, or Placed Calls. Press the listings on the
touch screen.
• If you are dialing on-hook, without a dial tone (predial), enter a number, then go off-hook by lifting the handset, pressing
the number on the touch screen, or pressing Dial,
, or .
• When you predial, your phone anticipates the number you are dialing by displaying matching numbers (if available) from
your Placed Calls log. This is called Auto Dial. To call a number displayed with Auto Dial, press the number, or scroll to it
and go off-hook.
Note Use the backspace (<<) soft key to erase digits that you enter incorrectly.
Additional Options—Place a Call
To place a call while another call is active (using a different line):
1. Press for a new line. The first call is automatically placed on hold.
2. Enter a number.
To dial from a Personal Address Book (PAB) entry:
1. Press > Personal Directory to log in.
2. Choose Personal Address Book and search for a listing.
Answer a Call
To answer a call, use one of the following methods:
• Press to answer with a headset, if unlit. Or, if is lit, press Answer or (flashing).
• Press , to answer with the speakerphone, press Answer, or (flashing).
• Press Answer to switch from a connected call to answer a new call, or, if the call is ringing on a different line, press
(flashing).
• Press Answer to answer a call using call waiting.
• Press iDivert to send a call to your voice messaging system.
End a Call
To end a call, use one of the following methods:
• Hang up the handset or press EndCall.
• If you are using a headset, press . Or, to keep headset mode active, press EndCall.
• If you are using the speakerphone, press or EndCall.
• Press EndCall to hang up one call, and preserve another call on the same line. If necessary, remove the call from hold first.
Hold and Resume a Call
Engaging the Hold feature typically generates music or a beep. A call-on-hold is indicated by the icon.
To put a call on hold:
1. Make sure the call you want to put on hold is highlighted.