Jeep 2004 Grand Cherokee - Manual (Page 70)

2. Press the memory button “1” if you are setting the
memory for driver one or number “2” if you are setting
the memory for driver two.
3. Adjust the seat, recliner, and driver’s outside rear view
mirrors to the desired position.
4. Set the radio station presets as you desire (up to 10 AM
and 10 FM station settings).
5. Press and release the SET button. An indicator light on
the set switch will flash, telling you that you are in the set
memory mode.
6. Press and release button number “1” or number “2” on
the driver’s door, depending on which transmitter you’re
using. The flashing indicator light on the set switch will
go out telling you that the driver memory has been set.
If your remote keyless entry transmitter is lost, you may
order a new transmitter from your local authorized
dealer. You must designate transmitter #1 or #2. Your
authorized dealer will have to program your vehicle to
match the new transmitter.
70 UNDERSTANDING THE FEATURES OF YOUR VEHICLE