Kontron AT8902M - Manual (Page 24)

AT8902M Introduction
Page 1 - 11 AT8902M User Guide
General
Safety Designed to meet or exceed the following:
• UL 60950, 3rd edition
• EN 60950
• LVD 73/23/EEC
• Denan Law
EMC Designed to meet or exceed the following:
• FCC 47 CFR Part 15, Subpart B
• EN55022, EN55024
• EN 300 386
Reliability • MTBF: > 650,000 hours @ 40°C / 104°F (Telcordia SR-332, Issue 1)
HW Monit
oring
LEDs • ATCA LEDs:
• 3 LEDs ("Ready for Hot Swap", "Out of Service", "Healthy")
• XFP LEDs:
• 2 LEDS (Link for each XFP)
Board Management • Based on IPMI 1.5
• FRU Management
• Sensors (Voltage, Temperature)
• Status and Alerting
• Hot Swap and Fabric
Table 1-5: AM4310 Main Specifications (Continued)
AM4310 SPECIFICATIONS