Kontron JRexplus-DC - Manual (Page 18)

KTD-S0008-F Page 13 Graphics Interface
JRexplus-DC User's Guide
7 Graphics Interface
The graphics interface supports DVI or CRT monitors and a variety of LCD panels with dual channels, color
depth of 18 bit and resolutions up to 1920x1200 for DVI/CRT and UXGA (1600x1200) for LCD.
7.1 DVI or CRT Connector
The DVI and CRT interface are available through the standard 29 pin I style DVI connector J11.
Header Pin Signal Name Function
1 TMDS2- TMDS data 2 (negative)
2 TMDS2+ TMDS data 2 (positive)
3 GND Ground
4 N.C. Not connected
5 N.C. Not connected
6 DDC_CLK DDC clock
7 DDC_DATA DDC data
8 VSYNC Analog vertical sync
9 TMDS1- TMDS data 1 (negative)
10 TMDS1+ TMDS data 1 (positive)
11 GND Ground
12 N.C. Not connected
13 N.C. Not connected
14 VCC 1) Power +5V
15 GND Ground
16 TMDS_HPD Hot plug detect
17 TMDS0- TMDS data 0 (negative)
18 TMDS0+ TMDS data 0 (positive)
19 GND Ground
20 N.C. Not connected
21 N.C. Not connected
22 GND Ground
23 TMDS_CLK+ TMDS clock (positive)
24 TMDS_CLK- TMDS clock (negative)
C1 RED Analog red
C2 GRN Analog green
C3 BLU Analog blue
C4 HSYNC Analog horizontal sync
1 9 17
C1
C2
C3
C4
C5 GND Analog ground
Note: 1) To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.