Kontron JRexplus-DC - Manual (Page 54)

KTD-S0008-F Page 49 Setup Guide
JRexplus-DC User's Guide
22.5.2.6.1 USB Mass Storage Device Configuration Submenu
Feature Option Description
USB Mass Storage Reset
Delay
10 Sec.
20 Sec.
30 Sec.
40 Sec.
Set the initialization delay time
Device N / A Show the device identifier
Emulation Type Auto
Floppy
Forced FDD
Hard Disk
CDROM
Define the emulation type. Forced FDD can be used to force a
HDD formatted drive to boot as FDD
22.5.2.7 SuperIO Configuration Submenu
Feature Option Description
Serial Port1 Address Disabled
3F8/IRQ4
3E8/IRQ4
2E8/IRQ3
Select I/O base and IRQ of serial port 1
Serial Port1 Mode RS232
RS422
RS485
The first serial port supports three different interfaces
RS422 = four wire differential interface
RS485 = two wire differential interface
Serial Port2 Address Disabled
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Select I/O base and IRQ of serial port 2
Parallel Port Address Disabled
378
278
Select I/O base and IRQ of parallel port
Parallel Port Mode Normal
Bi-Directional
ECP, EPP
ECP & EPP
Select the parallel port mode
EPP = Enhanced Parallel Port specification
ECP = Extended Capabilities Port specification
Parallel Port IRQ IRQ5
IRQ7
Select the parallel port IRQ
EPP Version 1.9, 1.7 Select the EPP specification
ECP Mode DMA Channel DMA0, DMA1
DMA3
Select the DMA channel for ECP specification
PS/2 Mouse Support Disabled
Enabled
Auto
Enabled forces the mouse port to be enabled regardless if a
mouse is present. 'Auto' frees IRQ12 if no mouse is present.