High-speed continuous shooting (high-speed burst), Choose, Shoot – Canon 510 HS User Manual

Page 100

Advertising
background image

Special Modes for Other Purposes

100

You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
“Specifications” (p. 37).

Choose .

z

Follow steps 1 – 2 on p. 84 and choose

.

Shoot.

X

Hold the shutter button all the way down to
shoot continuously.

•

On-screen image brightness in step 3, when you pressed the shutter
button halfway, may not match the brightness of your shots.

•

With shutter speeds of 1.3 seconds or slower, there will be a delay
before you can shoot again, as the camera processes images to
reduce noise.

•

Set [IS Mode] to [Off] when using a tripod or other means to hold the
camera still (p. 127).

•

If the flash fires, your shot may be overexposed. In this case, set the flash to

!

and shoot again.

•

You can also configure this setting in the

H menu, accessed by touching

H (p. 49).

High-Speed Continuous Shooting

(High-speed Burst)

Still Images

•

The resolution is

(1824 x 1368) and cannot be changed.

•

The resolution is

(2304 x 1728) and cannot be changed.

•

Focus, image brightness, and color are determined by the first shot.

•

Shooting may stop momentarily or continuous shooting may slow down
depending on shooting conditions, camera settings, and the zoom position.

•

As more shots are taken, shooting may slow down.

IXUS 510 HS

IXUS 240 HS

Advertising