Canon 510 HS - Manual (Page 132)

Viewing
132
Tilt the camera while browsing
images.
z To browse through images quickly while
touching and holding
q on the left edge of the
screen (p. 130), tilt the camera as shown as
you browse images. Tilt the camera in the
opposite direction while holding
r.
Images appear grainy at this time.
If you switch the camera to simple information display mode (p. 133), the
names of up to five detected people registered in Face ID (p. 67) will be
displayed.
Switch to simple information
display mode and check.
z Touch l repeatedly until simple
information display is activated, drag left or
right across the screen to choose an image.
X Names will be displayed on detected people.
• Always keep the strap around your wrist and hold the camera
securely to avoid dropping it.
• Images may not be switched in some cases, depending on how the
camera is tapped.
• To deactivate Active Display, touch H, touch n, choose [Active
Display] on the 1 tab, and then choose [Off] (p. 50).
Checking People Detected in Face ID
Still Images Movies
• If you do not want names to display on images shot using Face ID, touch H,
touch n, choose [Face ID Info] on the 1 tab, and then set [Name Display]
to [Off].