Canon 510 HS - Manual (Page 99)

Special Modes for Other Purposes
99
Join the subjects in the shooting
area and look at the camera.
X After the camera detects a new face, the lamp
blinking and self-timer sound will speed up.
(When the flash fires, the lamp will remain lit.)
About two seconds later, the camera will shoot.
z To cancel shooting after you have triggered
the self-timer, touch the screen.
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
Choose N.
z Follow steps 1 – 2 on p. 84 and choose N.
Choose the shutter speed.
z Touch ), choose the shutter speed (by
touching the desired position on the bar or
dragging the bar left or right), and then touch
^.
Check the exposure.
z Press the shutter button halfway to view the
exposure for your selected shutter speed.
Shoot.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• You can change the number of shots by touching on the screen in step 1,
touching op to choose the number of shots, and then touching ^. [Blink
Detection] (p. 80) is only available for the final shot.
Shooting Long Exposures (Long Shutter)
Still Images