Dri ving an d pa rki ng, Driving – Mercedes-Benz GL-Class 2015 User Manual

Page 175

Advertising
background image

R

you move the transmission out of position

P.

R

you switch to drive program S or M (AMG

vehicles).

R

you switch to an off-road program (except

for AMG vehicles).

R

you unfasten your seat belt or open the

driver's door.

R

the vehicle starts to roll.

R

the brake system requires this.

R

the temperature in the vehicle interior devi-

ates from the set range.

R

the system detects moisture on the wind-

shield when the air-conditioning system is

switched on.

R

the battery's condition of charge is too low.

i

Shifting the transmission to position P

does not start the engine.

i

If you shift the transmission from R to D,

the ECO start/stop function is available

again once the ¤ symbol reappears in

green in the multifunction display.

Deactivating/activating the ECO start/

stop function

All vehicles (except AMG vehicles)

X

To deactivate: press ECO button :.

Indicator lamp ; and the ¤ symbol in

the multifunction display go out.

X

To activate: press ECO button :.

Indicator lamp ; lights up. If all conditions

for automatic engine switch-off

(

Y

page 172) are fulfilled, the ¤ symbol

is shown in green in the multifunction dis-

play.
If not all conditions for automatic engine

switch-off (

Y

page 172) are fulfilled, the

¤ symbol is shown in yellow in the mul-

tifunction display. If this is the case, the

ECO start/stop function is not available.

i

If indicator lamp ; is off, the ECO start/

stop function has been deactivated man-

ually or as the result of a malfunction. The

engine will then not be switched off auto-

matically when the vehicle stops.

AMG vehicles

X

To switch off: in drive program C, press

ECO button :.

or

X

Switch to drive program S or M

(

Y

page 180).

Indicator lamp ; and the ¤ ECO sym-

bol in the multifunction display go out.

X

To activate: press ECO button :.

Indicator lamp ; lights up. If drive pro-

gram S or M is active, the automatic trans-

mission switches to drive program C.
If all conditions for automatic engine

switch-off (

Y

page 172) are fulfilled, the

¤ symbol is shown in green in the mul-

tifunction display.
If the conditions for automatic engine

switch-off are not all fulfilled (

Y

page 172),

the ¤ symbol is lit yellow. If this is the

Driving

173

Dri

ving

an

d

pa

rki

ng

Z

Advertising