Saf ety, Driving safety systems – Mercedes-Benz GL-Class 2015 User Manual

Page 79

Advertising
background image

R

a narrow vehicle traveling in front, e.g. a

motorbike

R

a vehicle traveling in front on a different line

relative to the center of your vehicle

Following damage to the front end of the vehi-

cle, have the configuration and operation of

the radar sensors checked at a qualified spe-

cialist workshop. This also applies to colli-

sions at low speeds where there is no visible

damage to the front of the vehicle.

Function

X

To activate/deactivate: activate or deac-
tivate PRE-SAFE

®

Brake in the on-board

computer (

Y

page 284).

If the PRE-SAFE

®

Brake is not activated, the

æ symbol appears in the multifunction

display.

Starting at a speed of around 4 mph (7 km/h),

this function warns you if you rapidly

approach a vehicle in front. An intermittent

warning tone will then sound and the ·

distance warning lamp will light up in the

instrument cluster.

X

Brake immediately to defuse the situation.

or

X

Take evasive action provided it is safe to do

so.

PRE-SAFE

®

Brake can also brake the vehicle

automatically under the following conditions:

R

the driver and front-passenger have their

seat belts fastened
and

R

the vehicle speed is between approx-

imately 4 mph (7 km/h) and 124 mph

(200 km/h)

At speeds of up to approximately 40 mph

(70 km/h) PRE-SAFE

®

Brake can also detect

stationary objects. Examples of stationary

objects are stopped or parked vehicles.

i

If there is an increased risk of collision,

preventive passenger protection measures

(PRE-SAFE

®

) are activated.

If the risk of collision with the vehicle in front

remains and you do not brake, take evasive

action or accelerate significantly, the vehicle

may perform automatic emergency braking,

up to the point of full brake application. Auto-

matic emergency braking is not performed

until immediately prior to an imminent acci-

dent.
You can prevent the intervention of the PRE-

SAFE

®

Brake at any time by:

R

depressing the accelerator pedal further.

R

activating kickdown.

R

releasing the brake pedal.

The braking action of PRE-SAFE

®

Brake is

ended automatically if:

R

you maneuver to avoid the obstacle.

R

there is no longer any danger of a collision.

R

there is no longer an obstacle detected in

front of your vehicle.

If you have activated DSR (

Y

page 258), PRE-

SAFE

®

Brake is deactivated.

STEER CONTROL

General information

STEER CONTROL helps you by transmitting a

noticeable steering force to the steering

wheel in the direction required for vehicle

stabilization.
This steering assistance is provided in partic-

ular if:

R

both right wheels or both left wheels are on

a wet or slippery road surface when you

brake.

R

the vehicle starts to skid.

Important safety notes

i

Observe the "Important safety notes" sec-

tion (

Y

page 68).

Driving safety systems

77

Saf

ety

Z

Advertising