Mercedes-Benz SL-Class 2015 - Manual (Page 308)

Display settings
Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
X
Press W.
X Select Settings Settings by turning cVd the
COMAND controller and press W to con-
firm.
X Select Display Display and press W to confirm.
X Select Brightness Brightness and press W to con-
firm.
X
Adjust the brightness by turning cVd the
COMAND controller and press W to con-
firm.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
design by manually selecting day or night
design, or opt for an automatic setting.
X
Press W.
X
Select Settings Settings by turning cVd the
COMAND controller and press W to con-
firm.
X
Select Display Display and press W to confirm.
X Select Day Mode Day Mode , Night Mode Night Mode or Auto‐ Auto‐
matic matic by turning cVd the COMAND con-
troller and press W to confirm.
A dot indicates the current setting.
Design Explanation
Day Mode Day Mode The display is set perma-
nently to day design.
Night Mode Night Mode The display is set perma-
nently to night design.
Automatic Automatic If the Automatic Automatic setting
is selected, COMAND
evaluates the readings
from the automatic vehi-
cle light sensor and auto-
matically switches
between the display
designs.
Time settings
General information
If COMAND is equipped with a navigation sys-
tem and has GPS reception, COMAND auto-
matically sets the time and date. You can
change the time in minute increments. The
date can also be changed.
i If you adjust the time in minute incre-
ments, any time zone settings and settings
for changing between summer and stand-
ard time are lost. Switching between sum-
mer and standard time (
Y
page 307).
i The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order to
work properly:
R route guidance on routes with time-
dependent traffic guidance
R calculation of expected time of arrival
i With this function, you can set the time for
every display in the vehicle.
Setting the time/date format
X
Press the W button.
X
Select Time Time by turning c V d the COMAND
controller and press W to confirm.
306
System settings
CO
MA
ND