Mercedes-Benz SL-Class 2015 - Manual (Page 354)

Example: route display stopped
:
Road name and city display when route
display has been stopped
; Distance of the crosshair from current
vehicle position
X
To get to the current vehicle position:
press W to confirm the symbol for the cur-
rent vehicle position.
X To change the map scale: select Scale Scale
and press W to confirm.
The scale bar appears.
X
Turn cVd the COMAND controller and
press W to confirm.
Recording the route
Notes
If you have activated COMAND and the SD
memory card has been inserted, you should
not take it out of the slot.
You can store up to 100 routes.
When you record a route, COMAND uses so-
called support points and displays the route
as a series of lines. If the route is then calcu-
lated, COMAND attempts to align the recor-
ded route with the digital map.
The support points of the route may not be on
a digitized road.
This is often the case for routes that have
been calculated using map data from other
sources.
Calling up the Routes menu
X Insert the SD memory card (
Y
page 445).
X
To switch to navigation mode: press the
Ø button.
X
To show the menu: press W the COMAND
controller.
X Select Destination Destination in the navigation sys-
tem menu bar by turning cVd the
COMAND controller and press W to con-
firm.
X Select Routes Routes .
Starting/ending recording
X Call up the Routes menu (
Y
page 352).
X To start recording : select Start Start
Recording Recording in the Routes menu by turning
cVd the COMAND controller and press W
to confirm.
During the recording, the recorded route is
shown behind the current vehicle position
with gray strokes (symbol for tire tracks).
X To end recording: select Stop Stop Recording Recording
in the Routes menu by turning cVd the
352
Navigation
CO
MA
ND