Mercedes-Benz SL-Class 2015 - Manual (Page 474)

Please see the respective operating instruc-
tions for how to operate the external audio
source.
Information on:
R Volume settings (
Y
page 295)
R Sound settings (
Y
page 296)
Increasing the volume on COMAND
X Select Volume Volume in the AUX display by turning
cVd the COMAND controller and press W
to confirm.
A menu appears. The # dot indicates the
current setting.
X Select Standard Standard or Boost Boost and press W to
confirm.
Standard Standard : the volume of the external audio
source is adjusted to a standard value.
Boost Boost : the volume of the external audio
source is raised by approximately 10 dB.
A device which is connected as an external
audio source may seem quieter or louder in
the vehicle, or the usual maximum volume
cannot be achieved. On some devices, it is
possible to adjust the volume separately. In
this case, start at a medium volume and
increase it gradually. This enables you to
determine whether the system is able to play
the music at high volume without distorting it.
Video
Your COMAND equipment
These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your
COMAND system may not be equipped with
all the features described.
General information
Automatic picture shutoff
The video image is only displayed for the
driver when the transmission lever is in posi-
tion P.
SPLITVIEW allows the front passenger to view
the video image (
Y
page 303).
When the transmission lever is disengaged
from position P, the following message
appears in the display: In order not to In order not to
distract distract you you from from the the traffic traffic situa‐ situa‐
tion, tion, the the picture picture is is faded faded out out while while
the vehicle is in motion. the vehicle is in motion.
As soon as the selector lever of the transmis-
sion is returned to position P, the video image
is shown.
472
Video
COMAND