Tec hni ca ldata, Service products and filling capacities – Mercedes-Benz SL-Class 2015 User Manual

Page 603

Advertising
background image

VIN

X

Move the front-passenger front seat to its

rearmost position.

X

Fold up floor covering : in front of the

front-passenger seat.

You will see VIN ;.

The VIN can also be found in the following

locations:

R

on the lower edge of the windshield

(

Y

page 601)

R

on the vehicle identification plate

(

Y

page 600)

Engine number

:

Emission control information plate,

including the certification of both federal

and Californian emissions standards

;

Engine number (stamped into the crank-

case)

=

VIN (on the lower edge of the windshield)

Service products and filling capaci-

ties

Important safety notes

G

WARNING

Service products may be poisonous and haz-

ardous to health. There is a risk of injury.
Comply with instructions on the use, storage

and disposal of service products on the labels

of the respective original containers. Always

store service products sealed in their original

containers. Always keep service products out

of the reach of children.

H

Environmental note

Dispose of service products in an environ-

mentally responsible manner.

Service products include the following:

R

Fuels

R

Lubricants (e.g. engine oil, transmission oil)

R

Coolant

R

Brake fluid

R

Windshield washer fluid

R

Climate control system refrigerant

Comply with all valid regulations with respect

to handling, storing, and disposing of service

fluids.
Components and service products must be

matched. You should therefore only use prod-

ucts that have been tested and approved by

Mercedes-Benz.
Information about tested and approved prod-

ucts can be obtained from an authorized

Mercedes-Benz Center or on the Internet at

http://bevo.mercedes-benz.com.
You can recognize service products approved

by Mercedes-Benz by the following inscrip-

tion on the containers:

R

MB-Freigabe (e.g. MB-Freigabe 229.51)

R

MB Approval (e.g. MB Approval 229.51)

Other designations or recommendations indi-

cate a level of quality or a specification in

accordance with an MB Sheet Number (e.g.

Service products and filling capacities

601

Tec

hni

ca

ldata

Z

Advertising