Driving and parking, Driving – Mercedes-Benz GLK-Class 2014 Owners Manual User Manual

Page 151

Advertising
background image

malfunction has caused the system to be

deactivated, the ¤ symbol is not

displayed.

Automatic engine switch-off

General notes
The ECO start/stop function is operational

and the ¤ symbol is displayed in green in

the multifunction display, if:

R

the indicator lamp in the ECO button is lit

green.

R

the outside temperature is within the range

that is suitable for the system.

R

the engine is at normal operating

temperature.

R

the set temperature for the vehicle interior

has been reached.

R

the battery is sufficiently charged.

R

the system detects that the windshield is

not fogged up when the air-conditioning

system is switched on.

R

the hood is closed.

R

the driver's door is closed and the driver's

seat belt is fastened.

If not all conditions for automatic engine

switch-off are fulfilled, the ¤ symbol is

shown in yellow.

i

All of the vehicle's systems remain active

when the engine has been stopped

automatically.

i

The engine can be switched off

automatically a maximum of four times

(first stop and three subsequent stops) in

succession. The ¤ symbol is shown in

yellow in the multifunction display after the

engine has been started automatically for

the fourth time. When the ¤ symbol is

shown in green in the multifunction display,

automatic engine switch-off is again

possible.

Vehicles with automatic transmission
If the vehicle is braked to a standstill in D or

N, the ECO start/stop function switches off

the engine automatically.

i

The HOLD function can be activated if the

engine has been switched off

automatically. It is then not necessary to

continue applying the brakes during the

automatic stop phase. When you depress

the accelerator pedal, the engine starts

automatically and the braking effect of the

HOLD function is deactivated.

Automatic engine start

General notes
The engine starts automatically if:

R

you switch off the ECO start/stop function

by pressing the ECO button.

R

you engage reverse gear R.

R

the vehicle starts to roll.

R

the brake system requires this.

R

the temperature in the vehicle interior

deviates from the set range.

R

the system detects moisture on the

windshield when the air-conditioning

system is switched on.

R

the condition of charge of the battery is too

low.

R

the driver's seat belt is removed or the

driver's door is opened.

Vehicles with automatic transmission
The engine is started automatically if you:

R

release the brake pedal when HOLD is not

activated and the transmission is in

position D or N.

R

depress the accelerator pedal.

R

move the transmission out of position P.

i

Shifting the transmission to position P

does not start the engine.

i

If you shift the transmission from R to D,

the ECO start/stop function is available

Driving

149

Driving

and

parking

Z

Advertising
This manual is related to the following products: