Dri vin g and parking, Towing a trailer – Mercedes-Benz GLK-Class 2014 Owners Manual User Manual

Page 216

Advertising
background image

climbing capability, decreases with

increasing altitude.

If the trailer swings from side to side:

X

Do not accelerate.

X

Do not counter-steer.

X

Brake if necessary.

Installing the ball coupling

G

WARNING

If the ball coupling is not installed and secured

correctly the trailer may come loose. There is

a risk of an accident.
Install and secure the ball coupling as

described in the ball coupling installation

instructions. Make sure that the ball coupling

is installed and secured correctly before every

journey.

!

Mercedes-Benz recommends that you

only use ball couplings that have been

tested and approved by Mercedes-Benz.

This helps to avoid damage to the vehicle.

Cover cap

X

Pull protective cap : in the direction of the

arrow, out of ball coupling recess ;.

X

Store protective cap : in a safe place.

X

Observe the manufacturer's installation

instructions.

G

WARNING

If the ball coupling is not installed and secured

correctly it can become detached while the

vehicle is in motion and fall onto the road.

There is a risk of an accident and injury.
Install and secure the ball coupling as

described in the ball coupling installation

instructions. Make sure that the ball coupling

is installed and secured correctly before every

journey.

Coupling up a trailer

Observe the maximum permissible trailer

dimensions (width and length).
Most U.S. states and all Canadian provinces

require by law:

R

safety chains between the towing vehicle

and the trailer. The chains should be cross-

wound under the trailer drawbar. They must

be fastened to the vehicle's trailer

coupling, not to the bumper or the axle.
Leave enough play in the chains to make

tight cornering possible.

R

a separate brake system for certain types

of trailer.

R

a safety switch for braked trailers. Check

the specific legal requirements applicable

to your state.
If the trailer detaches from the towing

vehicle, the safety switch applies the

trailer's brakes.

!

Do not connect the trailer's brake system

(if featured) to the hydraulic brake system

of the towing vehicle, as the latter is

equipped with an anti-lock brake system.

Doing so will result in a loss of function of

the brake systems of both the vehicle and

the trailer.

i

The vehicle's wiring harness features a

connection to the brake indicator lamp.

X

Make sure that the automatic transmission

is set to position P.

X

Apply the vehicle's parking brake.

X

Close all doors and the tailgate.

214

Towing a trailer

Dri

vin

g

and

parking

Advertising
This manual is related to the following products: