Replacing bulbs, Important safety notes, Overview: changing bulbs/bulb types – Mercedes-Benz E-Wagon 2013 Owners Manual User Manual

Page 132: Lights and windshield wipers

Advertising
background image

Replacing bulbs

Important safety notes

Xenon bulbs

G

DANGER

Xenon bulbs carry a high voltage. You could
get an electric shock and be seriously or even
fatally injured if you touch the electric
contacts on Xenon bulbs. Therefore, never
remove the cover from Xenon bulbs.
Do not change the Xenon bulbs yourself, but
have them replaced at a qualified workshop.

If your vehicle is equipped with Xenon bulbs,
you can recognize this by the following: the
cone of light from the Xenon bulbs moves
from the top to the bottom and back again
when you start the engine. For this to be
observed, the lights must be switched on
before starting the engine.
Bulbs and lamps are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times.
Have the headlamp setting checked regularly.

Other bulbs

G

WARNING

Bulbs and lamps can become very hot. For
this reason, allow them to cool down before
changing them. Otherwise, you could burn
yourself when you touch them.
Keep bulbs out of the reach of children.
Otherwise, they could, for example, damage
the bulbs and injure themselves.
Never use a bulb which has been dropped.
Such a bulb may explode and injure you.
Halogen bulbs are pressurized and could
explode when you change them, especially if
they are very hot. You should therefore wear
eye protection and gloves when you are
changing them.

There are bulbs other than the Xenon bulbs
that you cannot replace. Replace only the
bulbs listed (

Y

page 130). Have the bulbs that

you cannot replace yourself changed at a
qualified specialist workshop.
If you require assistance changing bulbs,
consult a qualified specialist workshop.
Do not touch the glass tube of new bulbs with
your bare hands. Even minor contamination
can burn into the glass surface and reduce
the service life of the bulbs. Always use a lint-
free cloth or only touch the base of the bulb
when installing.
Only use bulbs of the correct type.
If the new bulb still does not light up, consult
a qualified specialist workshop.
Bulbs and lamps are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times.
Have the headlamp setting checked regularly.

Overview: changing bulbs/bulb types

You can change the following bulbs. The bulb
type can be found in the legend.

Halogen headlamps
:

Low-beam headlamp: H7 55 W

;

High-beam headlamp: H7 55 W

=

Parking lamp/standing lamp: W 5 W

?

Turn signal lamp: 3457A

130

Replacing bulbs

Lights and windshield wipers

Advertising
This manual is related to the following products: