Switching the rear window wiper on/off, Lights and windshield wipers, Windshield wipers – Mercedes-Benz E-Wagon 2013 Owners Manual User Manual

Page 135

Advertising
background image

!

Do not operate the windshield wipers

when the windshield is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windshield can
scratch the glass if wiping takes place when
the windshield is dry.
If it is necessary to switch on the windshield
wipers in dry weather conditions, always
use washer fluid when operating the
windshield wipers.

!

If the windshield wipers leave smears on

the windshield after the vehicle has been
washed in an automatic car wash, wax or
other residues may be the reason for this.
Clean the windshield using washer fluid
after washing the vehicle in an automatic
car wash.

!

Intermittent wiping with rain sensor: due

to optical influences and the windshield
becoming dirty in dry weather conditions,
the windshield wipers may be activated
inadvertently. This could then damage the
windshield wiper blades or scratch the
windshield.
For this reason, you should always switch
off the windshield wipers in dry weather.

Combination switch
1

$ Windshield wipers off

2

Ä Intermittent wipe, low (rain sensor
set to low sensitivity)

3

Å Intermittent wipe, high (rain sensor
set to high sensitivity)

4

° Continuous wipe, slow

5

¯ Continuous wipe, fast

B

í Single wipe/ î To wipe the
windshield using washer fluid

X

Switch on the ignition.

X

Turn the combination switch to the
corresponding position.

In the Ä or Å position, the appropriate
wiping frequency is set automatically
according to the intensity of the rain. In
the Å position, the rain sensor is more
sensitive than in the Ä position, causing
the windshield wipers to wipe more
frequently.

Switching the rear window wiper on/

off

Combination switch
:

è Switch

2

ô To wipe with washer fluid

3

I To switch on intermittent wiping

4

0 To switch off intermittent wiping

5

ô To wipe with washer fluid

X

Turn the SmartKey to position

1 or 2 in the

ignition lock.

X

Turn switch : on the combination switch
to the corresponding position.
When the rear window wiper is switched on,
the icon appears in the instrument cluster.

Windshield wipers

133

Lights and windshield wipers

Z

Advertising
This manual is related to the following products: