Additional service products, Maintenance and care, Engine compartment – Mercedes-Benz E-Wagon 2013 Owners Manual User Manual

Page 333

Advertising
background image

Example: engine oil cap

X

Turn cap : counter-clockwise and remove
it.

X

Add engine oil.
If the oil level is at or below the MIN mark
on the oil dipstick, add 1.1 US qt (1.0 liter)
of engine oil.

X

Replace cap : on the filler neck and turn
clockwise.
Ensure that the cap locks into place
securely.

X

Check the oil level again with the oil
dipstick (

Y

page 330).

Further information on engine oil
(

Y

page 410).

Additional service products

Checking the coolant level

G

WARNING

In order to avoid any potentially serious burns:

R

use extreme caution when opening the
hood if there are any signs of steam or
coolant leaking from the cooling system, or
if the coolant temperature display indicates
that the coolant is overheated.

R

do not remove the pressure cap on the
coolant reservoir if the coolant temperature
is above 158 ‡ (70 †). Allow the engine to
cool down before removing the cap. The
coolant reservoir contains hot fluid and is
under pressure.

R

using a rag, slowly turn the cap
approximately

1

/

2

turn to relieve excess

pressure. If opened immediately, scalding
hot fluid and steam will be blown out under
pressure.

R

do not spill antifreeze on hot engine parts.
Antifreeze contains ethylene glycol which
may burn if it comes into contact with hot
engine parts.

X

Park the vehicle on a level surface.
Only check the coolant level when the
vehicle is on a level surface and the engine
has cooled down.

X

Turn the SmartKey to position

2 in the

ignition lock (

Y

page 153).

On vehicles with KEYLESS-GO, press the
Start/Stop button twice (

Y

page 154).

X

Check the coolant temperature display in
the instrument cluster.
The coolant temperature must be below
158 ‡ (70 †).

X

Turn the SmartKey to position
0 (

Y

page 153) in the ignition lock.

X

Slowly turn cap : half a turn counter-
clockwise to allow excess pressure to
escape.

X

Turn cap : further counter-clockwise and
remove it.
If the coolant is at the level of marker bar
= in the filler neck when cold, there is
enough coolant in coolant expansion
tank ;.
If the coolant level is approximately 0.6 in
(1.5 cm) above marker bar = in the filler

Engine compartment

331

Maintenance and care

Z

Advertising
This manual is related to the following products: