Trailer power supply, Trailer with 7-pin connector, Driving and parking – Mercedes-Benz G-Class 2013 Owners Manual User Manual

Page 208: Towing a trailer

Advertising
background image

This will use the braking effect of the engine,
so that less braking will be required to
maintain the speed. which relieves the load
on the brake system and prevents the brakes
from overheating and wearing too quickly. If
you need additional braking, depress the
brake pedal repeatedly rather than
continuously.

Driving tips

If the trailer swings from side to side:

X

Do not accelerate.

X

Do not counter-steer.

X

Brake if necessary.

R

Maintain a greater distance from the
vehicle in front than when driving without a
trailer.

R

Avoid braking abruptly. If possible, brake
gently at first to allow the trailer to run on.
Then, increase the braking force rapidly.

R

The values given for gradient-climbing
capabilities from a standstill refer to sea
level. When driving in mountainous areas,
note that the power output of the engine,
and consequently the vehicle's gradient-
climbing capability, decrease with
increasing altitude.

Trailer power supply

!

You can connect accessories with a

maximum power consumption of 180 W to
the permanent power supply.
You must not charge a trailer battery using
the power supply.

The trailer socket of your vehicle is equipped
at the factory with a permanent power supply.
The permanent power supply is supplied via
trailer socket pin 9.
A qualified specialist workshop can provide
more information about installing the trailer
electrics.

Trailer with 7-pin connector

General notes

You can make a connection to the 13-pin
socket on the ball coupling using an adapter
or, if necessary, an adapter cable. Both can
be obtained in a qualified specialist
workshop.

Installing the adapter
!

Make sure that there is enough slack in

the cable for cornering so that the cable
cannot become detached.

X

Open the socket cover.

X

Insert the connector with lug : into
groove ; on the socket and turn the
connector clockwise to the stop.

X

Make the cover engage.

X

If you are using an adapter cable, secure
the cable to the trailer with cable ties.

i

When the socket is connected, the

ultrasonic backing up aid is deactivated.

206

Towing a trailer

Driving and parking

Advertising
This manual is related to the following products: