Comand video dvd, Safety notes, Automatic picture fade-out – Mercedes-Benz S-Class 2010 User Manual

Page 193: Notes about video dvd operation, Notes about dvds, Control systems

Advertising
background image

X

Select

Active Source for Rear in the

COMAND.

X

Switch to the main function

COMAND in the

Rear Seat Entertainment System.

COMAND video DVD

Safety notes

G

Observe Safety notes, see page 176.

Automatic picture fade-out

If a video DVD is playing when the vehicle is
shifted from park position

P into neutral

position

N or drive position D the picture is

faded out automatically and the following
message appears in the display:

In order

not to distract driver, picture is

faded out while the vehicle is in

motion.
When the vehicle is shifted back into park
position

P, the picture comes on again.

When the vehicle is shifted into reverse gear
R, the rear view camera appears in the display

during video DVD playback.

Notes about video DVD operation

COMAND can playback commercially
available, prerecorded video DVDs that bear
the following label. You will usually find the
label on the DVD booklet, the inlay, or the
DVD itself.

i

Video DVDs differ from recordable DVD-

R and DVD-RW discs.

i

There may be playback problems when

playing copied DVDs.
There is a large variety of discs, disc-writing
software and writers available. This variety

means that there is no guarantee that the
system will be able to play discs that you
have written/copied yourself.

Some DVDs may not comply with the NTSC
or PAL TV playback standards. Sound, picture
and other playback problems may occur
when you play such DVDs.
COMAND can playback video DVDs meeting
the following requirements:

R

Correct regional code

R

NTSC or PAL TV standard

The appropriate information is usually given
either on the DVD or the DVD box. The factory
setting of COMAND is regional code 1. This
setting can only be changed five times at
most by an authorized Mercedes-Benz
Center. This will allow you to playback video
DVDs with other regional codes, as long as
they comply with the NTSC or PAL TV
standard.

Notes about DVDs

!

Do not affix stickers or labels to the discs.

These could peel away and damage
COMAND. COMAND is designed to hold
discs which comply with the IEC 60908
standard. You can therefore only use discs
with a maximum thickness of 1.3 mm.
If you insert thicker discs, e.g. those that
contain data on both sides (DVD on one
side and audio data on the other), they
cannot be ejected and can damage
COMAND.
Do not use CDs with a diameter of 8 cm.
Attempting to play discs with a diameter of
8 cm or playing such discs with an adapter
may cause damage COMAND.
Such damages are not covered by the
Mercedes-Benz Limited Warranty.
Only use round discs with a diameter of
12 cm.

COMAND video DVD

191

Control systems

221_AKB; 6; 20, en-US
d2ugruen,

Version: 2.11.8.1

2009-09-24T13:28:17+02:00 - Seite 191

Z

Advertising