Mercedes-Benz S-Class 2010 - Manual (Page 213)

You can select whether the trunk lid should
open fully or only to the height of the roof.
X Select Vehicle.
The main area is active.
X Selecting Trunk Opening-height
Restriction: Slide
X V Y or rotate c V d .
X Switching trunk opening-height
restriction on or off: Press W.
COMAND automatic climate control
Introduction
i The components and operating principles
of COMAND can be found on ( Y page 76).
G Warning!
Follow the recommended settings for heating
and cooling given on the following pages and
pages in the “Controls in detail” chapter.
Otherwise the windows could fog up,
impairing visibility and endangering you and
others.
You can operate the climate control via
COMAND or via the buttons on the climate
control panel (
Y page 363).
Some of the special climate control functions
can only be operated via COMAND.
The following climate control functions can
be operated via COMAND:
R Temperature ( Y page 211)
R Air distribution ( Y page 212)
R Air volume ( Y page 212)
R Switching off cooling (Æ)
(
Y page 213)
R
Central climate control ( Mono)
( Y page 214)
R Footwell temperature ( Y page 214)
R Air flow from air vents ( Y page 215)
R Rear climate control ( Y page 215)
The climate control menu is called up via the
climate control settings.
Climate control settings with functions (submenus)
:
Temperature, driver’s side
; Air distribution, driver’s side
=
Air volume, driver’s side
?
Central menu, climate control
A
Air volume, passenger side
B
Air distribution, passenger side
C
Temperature, passenger side
Setting temperature
G
Observe Safety notes, see page 365.
Use the temperature controls w
(
Y page 363) in the center console or
COMAND climate control settings to
separately adjust the air temperature on each
side of the passenger compartment.
X Select climate control settings Q
Temperature, left or right and then press
W.
COMAND automatic climate control
211
Control systems
221_AKB; 6; 20, en-US
d2ugruen,
Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 211
Z