Control systems, Comand introduction – Mercedes-Benz S-Class 2010 User Manual
Page 82
Symbol
How to use the COMAND
controller
Z
V
Æ
X
Slide
R
to move through vertical
menus
R
to exit horizontal menus
X
Slide and hold
R
to move through a navigation
map
X
V
Y
X
Slide
R
to move through horizontal
menus
R
to exit vertical menus
X
Slide and hold
R
for fast forward or reverse for
audio CD or audio DVD
playback
R
to move through a navigation
map
a
V
b
X
Slide and hold
R
to move through a navigation
map
USB socket
Connect USB storage device to the built-in
USB socket : in the glove box to transfer
data (
page 95) or to playback audio tracks
i
Do not use USB extensions or adapters.
They could impair functionality.
The initialization of large USB storage
devices that contain a large number of files
may take several minutes.
Supported USB storage devices
The following USB storage devices are
supported:
R
USB flash drives
R
USB hard drives (1", 1.8", and 2.5") with a
starting/steady current not to exceed
800 mA (separate power supply may be
necessary)
i
The USB socket supports USB storage
devices of “USB Device Subclass 6”.
Information on “USB Device Subclass 6” is
available from the manufacturer of the
respective device.
Media interface
The media interface is located in the glove
box. For information about using the media
interface, see (
Control panel on rear armrest
Occupants in the rear can adjust the volume
of the active audio source. They can also
select the next or previous track, scene or
station.
i
This function is only available in vehicles
with rear multicontour seats.
80
COMAND introduction
Control systems
221_AKB; 6; 20, en-US
d2ugruen,
Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 80