Mercedes-Benz S-Class 2010 - Manual (Page 221)

Adjusting seat backrest curvature in
lumbar area
This function is used to adjust the air
chambers in the lumbar area of the seat
backrest.
X Select seat ( Y page 216).
X Selecting Lumbar: Slide X V Y or rotate
c V d .
X Confirming selection: Press W.
Crosshair appears.
You can use them to make two settings:
R vertical: shift the point of greatest
curvature upward or downward
R
horizontal: adjust the degree of
curvature
X Slide Z V Æ or X V Y until desired setting is
reached.
X Saving setting: Press W.
Adjusting seat backrest curvature in
shoulder area
This function is used to adjust the air
chambers in the shoulder area of the seat
backrest.
X Select seat ( Y page 216).
X Selecting Shoulders: Slide X V Y or rotate
c V d .
X Confirming selection: Press W.
A scale appears.
X Slide Z V Æ or rotate c V d until desired
setting is reached.
X Saving setting: Press W.
Drive-dynamic multicontour seats
For information on manual multicontour seat
settings, see “Multicontour seats, front”
(
Y page 218).
i If PRE-SAFE ® has been activated, the air
pressure in the air chambers (sides of seat
cushion and seat backrest) of the drive-
dynamic multicontour seats is increased.
The drive-dynamic multicontour seat
automatically adjusts the lateral support
provided by the seat backrest to your driving
style.
The drive-dynamic multicontour seat
electronically controls the air pressure in the
air chambers of the seat backrest side
bolsters. This function improves driving
comfort and pleasure.
X Select seat ( Y page 216).
X Selecting Dynamic Seat: Slide X V Y or
rotate c V d .
X Confirming selection: Press W.
A scale appears.
COMAND seats
219
Control systems
221_AKB; 6; 20, en-US
d2ugruen,
Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 219
Z