Mercedes-Benz CLS-Class 2009 Owners Manual - Manual (Page 313)

Replacing bulbs
311
X Place bulb socket 6 back into the housing
and turn it clockwise until it engages.
X Align housing cover 1 and turn it clock-
wise until it engages.
High-beam and high-beam flasher bulb
(halogen headlamps)/high-beam
flasher bulb (Bi-Xenon headlamps)
X Turn housing cover 2 counterclockwise
and remove it.
X Turn bulb socket 4 with the bulb counter-
clockwise and remove it.
X Pull the bulb out of bulb socket 4 .
X Press the new bulb gently into bulb socket
4 .
X Place bulb socket 4 back into the housing
and turn it clockwise until it engages.
X Align housing cover 2 and turn it clock-
wise until it engages.
Front turn signal lamp bulb
X Turn bulb socket 3 with the bulb counter-
clockwise and remove it.
X Press gently onto the bulb and turn it coun-
terclockwise out of bulb socket
3 .
X Press the new bulb gently into bulb socket
3 and turn clockwise until it engages.
X Place bulb socket 3 back into the housing
and turn it clockwise until it engages.
Parking and standing lamp bulb
Halogen headlamps
X Turn housing cover 2 counterclockwise
and remove it.
X Pull out bulb socket 5 with the bulb.
X Pull the bulb out of bulb socket 5 .
X Press the new bulb gently into bulb socket
5 .
X Press bulb socket 5 back into the lamp.
X Align housing cover 2 and turn it clock-
wise.
Bi-Xenon headlamps
In vehicles with Bi-Xenon headlamps, the
bulbs of the parking and standing lamps are
LEDs.
! Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.
Replacing bulbs for rear lamps
Tail lamp unit
The tail lamps are equipped with HiP bulbs
and LEDs. Have them replaced at an author-
ized Mercedes-Benz Center.
G Observe Safety notes, see
page 308.
License plate lamps
1 Screws
2 Lamp cover
X Switch off the ignition.
X Turn the exterior lamp switch to position
M .
Practical hints
Z