Replacing wiper blades, Safety notes, Placing wiper arms in vertical position – Mercedes-Benz CLS-Class 2009 Owners Manual User Manual
Page 314: Practical hints

Replacing wiper blades
312
X
Open the trunk.
X
Loosen both screws
1
.
X
Remove lamp cover
2
.
X
Replace the bulb.
X
Reinstall lamp cover
2
.
X
Retighten screws
1
.
Replacing wiper blades
For safety reasons, switch off wipers and
remove SmartKey from starter switch (vehi-
cles with KEYLESS-GO: Make sure the vehi-
cle’s on-board electronics have status
0)
before replacing a wiper blade. Otherwise,
the wiper motor could suddenly turn on and
cause injury.
Wiper blades are components that are sub-
ject to wear and tear. Replace the wiper
blades twice a year, preferably in the spring
and fall. Otherwise the windows will not be
properly wiped. As a result, you may not be
able to observe surrounding traffic condi-
tions and could cause an accident.
!
To avoid damage to the hood the wiper
arms should only be folded forward when
in the vertical position.
!
Never open the hood when a wiper arm is
folded forward.
Hold on to the wiper when folding a wiper
arm back. If released, the force of the
impact from the tensioning spring could
crack the windshield.
Do not allow a wiper arm to contact the
windshield glass without a wiper blade
inserted.
For your convenience, we recommend that
you have this work carried out at an author-
ized Mercedes-Benz Center.
Wiper arms in vertical position
X
Make sure the hood is fully closed.
Practical hints