Mercedes-Benz M-Class 2009 Owners Manual - Manual (Page 110)

Memory function
108
! If an exterior rear view mirror housing is
forcibly pushed forward (hit from the rear)
or forcibly pushed rearward (hit from the
front), press button
1 to fold mirrors in,
then press button 1 again to fold mirrors
out. Do not force mirrors by hand as this
may damage the adjustment mechanism.
The mirror housing is then properly
positioned and you can adjust the mirror in
the usual manner.
Please make sure both rear view mirrors
are folded out before driving off.
Memory function
Notes
With the memory function you can store up
to three different configurations per front
seat.
Each memory position button on the driver’s
side can store all of the following settings:
R Seat position
R Multicontour seat: previously saved setting
R Steering wheel position
R Exterior rear view mirrors’ position
G Warning!
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
Each memory position button on the front
passenger side can store all of the following
settings:
R Seat position
R Multicontour seat: previously saved setting
M Memory button
1, 2, 3 Memory position button
Storing positions into memory
X Adjust the seats.
X On the driver’s side, additionally adjust the
steering wheel and exterior rear view
mirrors to the desired positions.
X Press memory button M.
X Release memory button M and press
memory position button 1, 2 or 3 within
3 seconds.
When the settings are stored to the
selected position, an acknowledgement
signal sounds.
Controls in detail