Mercedes-Benz M-Class 2009 Owners Manual - Manual (Page 157)

Control system
155
Example illustration for setting the hour
X Press button æ or ç to set the hours
or minute(s).
Setting the date
This function is not available if your vehicle is
equipped with the COMAND system and
navigation module.
X Move the selection marker with button
æ or ç to the Time/Date submenu.
X Press button j or k repeatedly until
the message Date Set Month, Date Set
Day, or Date Set Year appears in the
multifunction display.
The selection marker is on the current
setting.
Example illustration for setting the month
X Press button æ or ç to set the
month, day, or year.
Lighting submenu
Access the Lighting submenu via the
Settings menu. Use the Lighting submenu
to change the lamp and lighting settings on
your vehicle.
The following functions are available:
R Setting daytime running lamp mode (USA
only) (
Y page 155)
R Setting locator lighting ( Y page 156)
R Setting night security illumination
(
Y page 156)
R Setting interior lighting delayed shut-off
(
Y page 157)
Setting daytime running lamp mode (USA
only)
X Move the selection marker with button
æ or ç to the Lighting submenu.
X Press button j or k repeatedly until
the message Lamp Circuit Headlamp
appears in the multifunction display.
The selection marker is on the current
setting.
X Press button æ or ç to select
manual operation (Manual) or daytime
running lamp mode (Constant).
With daytime running lamp mode activated
and the exterior lamp switch in position
M or U , the low-beam headlamps are
switched on when the engine is running.
Controls in detail
Z