Hazard warning flasher, Headlamp cleaning system, Controls in detail – Mercedes-Benz G-Class 2009 Owners Manual User Manual

Page 77: Lighting

Advertising
background image

High beam

X

Turn the exterior lamp switch to position
L (

Y

page 72).

X

Switching on: Push the combination

switch in direction of arrow :.
The high-beam headlamp indicator lamp
K in the instrument cluster comes on.

X

Switching off: Pull the combination switch

in direction of arrow ; to its original
position.

High-beam flasher

X

Switching on: Pull the combination switch

briefly in direction of arrow ;.

Turn signals

X

Press the combination switch in direction
of arrow : or ;.
The corresponding turn signal indicator
lamp ! or # in the instrument
cluster flashes.

The combination switch resets automatically
after major steering wheel movements.

i

To signal minor directional changes such

as changing lanes, press combination
switch only to point of resistance and
release. The corresponding turn signal
lamps will flash three times.

Hazard warning flasher

The hazard warning flasher can be switched
on at all times, even with the SmartKey
removed from the starter switch.
The hazard warning flasher comes on
automatically when an air bag deploys.

X

Switching on: Press hazard warning

flasher switch :.
All turn signal lamps are flashing.

i

With the hazard warning flasher activated

and the combination switch set for either
left or right turn, only the respective left or
right turn signals will operate when the
ignition is switched on.

X

Switching off: Press hazard warning

flasher switch : again.

i

If the hazard warning flasher has been

activated automatically, press hazard
warning flasher switch : to switch it off.

Headlamp cleaning system

Lighting

75

Controls in detail

463_AKB; 2; 52, en-US
d2ureepe,

Version: 2.11.7.1

2008-12-02T10:52:11+01:00 - Seite 75

Z

Advertising
This manual is related to the following products: