Mercedes-Benz G-Class 2009 Owners Manual - Manual (Page 94)

could lead to an accident and cause injury to
yourself and others.
Please observe related messages appearing
in the multifunction display.
Switching from HIGH to LOW
! The shifting procedure can only be
performed when the following conditions
are met:
R The engine is running.
R The automatic transmission is in neutral
position
N.
R
The vehicle is not at a standstill.
R
The vehicle speed does not exceed
25 mph (40 km/h).
X Press upper half (“LOW”) of the transfer
case switch.
Once the shift is complete, transfer case
position L appears in transfer case
indicator :.
If the shifting procedure does not take place,
press upper half (“LOW”) of the transfer case
switch once more.
X Shift the automatic transmission into drive
position
D.
Switching from LOW to HIGH
! The shifting procedure can only be
performed when the following conditions
are met:
R
The engine is running.
R
The automatic transmission is in neutral
position
N.
R
The vehicle is not at a standstill.
R
The vehicle speed does not exceed
43 mph (70 km/h).
X Press lower half (“HIGH”) of the transfer
case switch.
Once the shift is complete, transfer case
position H appears in transfer case
indicator :.
If the shifting procedure does not take place,
press lower half (“HIGH”) of the transfer case
switch once more.
X Shift the automatic transmission into drive
position
D.
Messages in the multifunction display
If a shift was not completed and one of the
following messages appears in the
multifunction display:
R
TC shift conditions not fulfilled
The shift did not take place. At least one
shift condition was not met.
X Repeat the shifting procedure.
R
TC in neutral
The shift did not take place. The transfer
case is in neutral. Transfer case position N
appears in transfer case indicator :.
X Repeat the shifting procedure.
G Warning!
If the transfer case is in Neutral, the park
position P of the automatic transmission will
not hold the vehicle. The parking brake must
be engaged to hold the vehicle in place.
R
TC shift procedure canceled
The shift did not take place.
X Repeat the shifting procedure.
R
Transfer case Visit workshop
There may be a malfunction in the system.
X Repeat the shifting procedure.
If the shifting procedure still does not take
place:
X Have the vehicle checked at an
authorized Mercedes-Benz Center as
soon as possible.
92
Transfer case
Controls in detail
463_AKB; 2; 52, en-US
d2ureepe,
Version: 2.11.7.1
2008-12-02T10:52:11+01:00 - Seite 92