Mercedes-Benz CLK-Class 2008 Owners Manual - Manual (Page 128)

127
Controls in detail
Memory function
̄
Memory function
Prior to operating the vehicle, the driver
should check and adjust the seat height,
seat position fore and aft, and seat back-
rest angle if necessary, to ensure adequate
control, reach and comfort. The head
restraint should also be adjusted for
proper height. See also the section on
air bags (
୴ page 65) for proper seat
positioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, operation
and comfort. Both the interior and exterior
rear view mirrors should be adjusted for
adequate rear vision.
Fasten seat belts. Infants and small chil-
dren should be seated in a properly se-
cured restraint system that complies with
U.S. Federal Motor Vehicle Safety
Standards 213 and 225 and
Canadian Motor Vehicle Safety Standards
213 and 210.2.
With the memory function you can store up
to three different configuration.
Each stored position on the driver’s side
includes the following settings:
ț Seat position
ț Steering wheel position
ț Exterior rear view mirror position
ț Multicontour seat*: previously saved
setting
Each stored position on the passenger side
includes the following setting:
ț Seat position
Warning!
G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.