Mercedes-Benz CLK-Class 2008 Owners Manual - Manual (Page 163)

162
Controls in detail
Control system
Setting the date (year)
This function can only be seen with audio
system.
̈ Move the selection marker with
button
æ or ç to the Time/Date
submenu.
̈ Press button j or k repeatedly
until the message Set Date Year
appears in the multifunction display.
The selection marker is on the year
setting.
̈ Press button æ or ç to set the
year.
Lighting submenu
Access the Lighting submenu via the
Settings... menu. Use the Lighting
submenu to change the lamp and lighting
settings on your vehicle.
The following functions are available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
button
æ or ç to the Lighting
submenu.
̈ Press button j or k repeatedly
until the message Headlamp Mode ap-
pears in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
manual operation ( Manual ) or daytime
running lamp mode ( Constant ).
i
Vehicles with COMAND*:
For information on setting the date in COMAND,
refer to the separate COMAND operating in-
structions.
Function Page
Setting daytime running lamp
mode (USA only) 162
Setting locator lighting 163
Setting night security
illumination 164
Setting interior lighting delayed
shut-off 165
i This function is not available in countries
where the daytime running lamp mode is
mandatory and therefore in a constant mode.