Mercedes-Benz CLK-Coupe 2007 Owners Manual User Manual
Page 123
122
Controls in detail
Seats
Placing rear head restraints upright
̈
Pull the rear head restraint forward un-
til it locks into position.
Head restraint tilt
Two different head restraint angle
positions are available.
̈
Press the release button (
and tilt the head restraint to the
desired position.
Removing and installing rear seats
head restraints
1 Release button
Warning!
G
Make sure the head restraints engage when
placing them upright. Otherwise their pro-
tective function cannot be assured.
i
Adjust the head restraint in such a way that
it is as close to the head as possible.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an
accident.
Do not interchange head restraints from
front and rear seat.