Nav* menu vehicle status message memory menu – Mercedes-Benz CLK-Coupe 2007 Owners Manual User Manual
Page 150

149
Controls in detail
Control system
1 MP3 mode (vehicles with COMAND*)
2 Current track
̈
Press button
k or j repeatedly
until the desired track is selected.
For more information on MP3, see “MP3
notes” (
page 224), and for operating,
NAV* menu
The
NAV
menu contains the functions
needed to operate your navigation system.
̈
Press button
è or ÿ repeatedly
until the message
NAV
appears in the
multifunction display.
ț
If COMAND* is switched off, the mes-
sage
Nav off
appears in the multifunc-
tion display.
ț
With COMAND* switched on but route
guidance not activated, the direction of
travel and, if available, the name of the
street currently traveld on appear in
the multifunction display.
ț
With COMAND* switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
Vehicle status message memory menu
Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the
system. Such messages appear in the
multifunction display and are based on
conditions or system status the vehicle’s
system recorded.
The vehicle status message memory menu
only appears if there are any messages
stored.
i
Level of information displayed will vary de-
pending on the information contained on the CD
with MP3 files insert in the single CD player of
the COMAND* system.
To select a CD from the CD changer* magazine,
press a number on the audio system or the
COMAND* system key pad located in the center
console.