Mercedes-Benz CLK-Coupe 2006 Owners Manual - Manual (Page 106)

105
Controls in detail
Locking and unlocking
ț To lock or unlock the vehicle, the
SmartKey with KEYLESS-GO must be
located outside the vehicle within ap-
proximately 3 ft (1 m) of the door to be
opened or the trunk lid.
ț In order to start the engine with the
SmartKey with KEYLESS-GO:
ț The SmartKey with KEYLESS-GO
must be located in the vehicle.
ț All doors must be closed.
ț The brake pedal must be firmly de-
pressed. Do not depress the accel-
erator.
ț If the SmartKey with KEYLESS-GO is
positioned farther away from the vehi-
cle, the system may no longer recog-
nize the SmartKey with KEYLESS-GO.
The vehicle then cannot be locked or
the engine started via the KEYLESS-GO
system.
ț If the SmartKey with KEYLESS-GO is re-
moved from the vehicle (e.g. if passen-
ger exits the vehicle with the SmartKey
with KEYLESS-GO).
ț with the starter switch position 1,
the message:
Key not recognized
appears in the multifunction display
ț with the engine running, the
message:
Key not recognized
appears in the multifunction display
while driving off.
Find the SmartKey with KEYLESS-GO or
change its present location immediate-
ly (e.g. place it on the front passenger
seat or insert it in shirt pocket).
ț If you have started the engine with the
KEYLESS-GO start/stop button
(
୴ page 35), you can turn it off again
with:
ț the KEYLESS-GO start/stop button
ț the SmartKey inserted in the starter
switch, when the gear selector le-
ver is in position P
ț Remember that the engine can be
started by anyone with a SmartKey
with KEYLESS-GO that is left inside the
vehicle.
Possibility 1:
(One SmartKey with KEYLESS-GO in
the vehicle, one SmartKey with
KEYLESS-GO outside the vehicle):
If you leave the SmartKey with
KEYLESS-GO behind when exiting and
locking the vehicle, no message ap-
pears in the multifunction display.
Possibility 2:
(One SmartKey with KEYLESS-GO in
the vehicle, no SmartKey with
KEYLESS-GO outside the vehicle):
When exiting and trying to lock the ve-
hicle, the message
Key recognized in vehicle
will appear in the multifunction display.
The vehicle will not be locked.