Mercedes-Benz CLK-Coupe 2006 Owners Manual User Manual

Page 423

Advertising
background image

422

Practical hints

Flat tire

1 Wheel wrench

̈

On wheel to be changed, loosen but do
not yet remove the wheel bolts
(approximately one full turn with
wrench

1).

The jack take-up brackets are located
directly behind the front wheel housings
and in front of the rear wheel housings.

2 Jack
3 Take-up bracket

̈

Place jack

2 on firm ground.

̈

Position jack

2 under take-up

bracket

3 so that it is always vertical

(plumb-line) as seen from the side,
even if the vehicle is parked on an
incline.

̈

Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the
ground. Never start engine while
vehicle is raised.

Warning!

G

The jack is intended only for lifting the

vehicle briefly for wheel changes. It is not

suited for performing maintenance work

under the vehicle.

ț

Never start the engine when the vehicle
is raised.

ț

Never lie down under the raised vehicle.

Advertising