Mercedes-Benz CLK-Coupe 2006 Owners Manual - Manual (Page 403)

402
Practical hints
Where will I find...?
1 Vehicle tool kit
2 Arrow
3 Minispare wheel, Wheel bolts for
Minispare wheel
4 Vehicle tool kit storage well casing
̈ Remove vehicle tool kit storage well
casing
4.
̈ Remove Minispare wheel 3.
Storing the Minispare wheel
̈ Place Minispare wheel 3 in wheel
well.
̈ Place vehicle tool kit storage well
casing
4 over the Minispare wheel.
Make sure arrow 2 on vehicle tool kit
storage well casing 4 points in the
direction of travel.
̈ Place storage well casing ( ୴ page 398)
over vehicle tool kit storage well
casing
4 and turn the retaining screw
( ୴ page 398) clockwise as far it will go
to secure the Minispare wheel.
̈ Disengage trunk floor handle in upper
edge of trunk and lower trunk floor cov-
er.
i
Arrow 2 on vehicle tool kit storage
well casing 4 must point in the
direction of travel. Otherwise you
cannot place the storage well casing
(
୴ page 398) on top and secure the
Minispare wheel with the retaining
screw (
୴ page 398).
!
To prevent damage, always disengage
trunk floor handle from upper edge of
trunk and lower trunk floor before
closing the trunk.
Warning!
G
The dimensions of the Minispare wheel are
different from those of the road wheels. As
a result, the vehicle handling characteristics
change when driving with a Minispare wheel
mounted.
The Minispare wheel should only be used
temporarily, and should be replaced with a
regular road wheel as quickly as possible.
Do not switch off the ESP ® when a Minis-
pare wheel is mounted.