N, see “setting locator light- ing – Mercedes-Benz CLK-Coupe 2006 Owners Manual User Manual

Page 162

Advertising
background image

161

Controls in detail

Control system

For more information on the daytime run-
ning lamp mode, see “Lighting”
(

page 131).

Setting locator lighting

With the locator lighting feature activated
and the exterior lamp switch in
position

U, the following lamps will

switch on during darkness when the vehi-
cle is unlocked with the SmartKey:

ț

Parking lamps

ț

Tail lamps

ț

License plate lamps

ț

Side marker lamps

ț

Front fog lamps

The locator lighting switches off when the
driver’s door is opened.

If you do not open a door after unlocking
the vehicle with the SmartKey, the lamps
will switch off automatically after approxi-
mately 40 seconds.

To activate locator lighting:

̈

Make sure the function surround light-
ing is set to

on

, see (

page 161).

̈

Move the selection marker with
button

æ or ç to the

Lighting

submenu.

̈

Press button

j or k repeatedly

until the message

Function Surround

lighting

appears in the multifunction

display.

The selection marker is on the current
setting.

̈

Press button

æ or ç to switch

the locator lighting function

on

.

̈

Turn the exterior lamp switch to
position

U when exiting the vehicle

(

page 131).

The locator lighting feature is
activated.

i

If you turn the exterior lamp switch to
another position, the corresponding
lamp(s) will switch on.

For safety reasons, resetting the

Lighting

submenu to factory settings

(

page 153) while driving will not

deactivate the daytime running lamp
mode.

The following message appears in the
multifunction display:

Lighting – Cannot be completely
reset to factory settings while
driving

.

Advertising